Hot Rolled Steel Fireplace Hearth, Built in place
Hot Rolled Steel Divider Panel, This was built from one sheet of 1/4" steel so the heat patterns of the steel would travel through the panel.
A fresh coat of lacquer
Custom Structural Steel bracket,
Can you believe this backyard is only 9' deep? The transformation was incredible. The poly gal fence conceals the once over bearing AC units.This railing was built using 1/2" x 2" solid steel bar for the posts and 1/2" round bar for the horizontal runners. It was capped in cedar.
I love the way this corner detail turned out.
We collaborated with Land Interactive on this project. They have fantastic vision. We installed the steel for them.
This is the same project as above. We terraced the courtyard with 1/4" steel. We formed 9' boxes that work their way down the property.
These planters were built for the "Mr Chow" restaurant that is at the new W Hotel in Miami Florida. We used Corten steel and added heavy duty casters so they could be rolled in during the severe weather. This is what 5000 lbs of steel looks like.
We are almost done with this gate. It will be fitted with frosted acrylic panels and our custom stainless lever latch.
This Ipe planter was built reclaimed Ipe. The metal frame was powder coated bronze.
We love this house. If you look at our "landscape" and "Doors" section you'll see the rest of it. The "Coolest Screen Door Ever" resides here. This gate was powdercoated silver and built to last out of 10 ga 2"x3" tubing. The panels are frosted acrylic.
We designed this latch, because frankly there just aren't any cool off the shelf latches out there. This stainless latch automatically latches when shut. It rides on internal bronze bushings and is spring loaded.
We worked with a local Austinite who wanted to transform his lot into an organic farm with 4'x4' square foot garden table. So we built 56 of them. It was a lot of work, but it turned out real cool.The steel frame was simply painted and the wood is Angel's heartWe built this steel privacy fence to mimic the divide panel on the inside of the house.This automated driveway gate was a calaboration with the client. She came over and drew the gate on several pieces of steel and we cut it out. We actually welded a bead on the entire edge of the tree to give it depth. The branches were banded with hand hammered steel flat bar. The entire gate was was left natural to patina and the branches were hand painted by the home owner.
No comments:
Post a Comment